Dirty Water Tank - Bissell CROSSWAVE PET User Manual

Dirty Water Tank

WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
To release Dirty Water
Tank, press down on
recessed button on the
top of the tank.
Did You Know?
The Float Stack is what prevents your Dirty Water Tank from overfl owing.
When your tank is full, the fl oat will shut OFF your suction motor creating a
high pitched sound indicating it is time to empty your tank.
4
Remove Strainer from tank
then throw debris in trash.
7
Hand wash the vacuum filter and screen with
warm water and mild detergent.
2
Grab the front handle while
pressing down on button
and pull tank away from the
machine.
5
Pour dirty water out. Rinse the
inside of the tank.
8
Rinse the float located at the bottom of the
top of the tank.
3
Grasp top of dirty water tank
in recessed areas on each side
of the filter and pull upward to
remove the top of the tank.
6
Remove the filter from the
top of the tank by pulling
it up.
www.BISSELL.com
11