Changing The Brush Roll; Storing Your Machine - Bissell CROSSWAVE HF2 Manual

Changing the Brush Roll

1. Press button and pull up on
tab to remove brush window.
4. Press tab of brush down to
lock into place.

Storing Your Machine

1. Wrap cord around cord wrap
for storage.
Note: Any other maintenance or servicing not included in this manual should be performed by an
authorized service representative.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
WARNING
electrical outlet before performing maintenance or troubleshooting.
2. Pull tab to remove brush roll.
5. Reinstall brush roll window.
Align tabs on edges of foot.
2. Store machine indoors in a
dry location.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3. Reinstall brush roll. Place
end of brush into right side
of foot.
6. Press window so it clicks
into place.
BISSELLdirect.co.uk 9