Machine Storage - Bissell CROSSWAVE PET User Manual

Rinse and Storage Tray (cont.)
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
9
10
Replace the Brush roll window by first lining up the brush window tabs with the edges of the foot.
Then press the window back into place until you hear a "click".

Machine Storage

Put the machine away in a closet or basement until the next use.
Store cleaner in a protected, dry area. Since this product uses water, it
must not be stored where there is a danger of freezing. Freezing will
damage internal components and may void the warranty.
NOTE: Any solution remaining in the Clean Water Tank should be emptied prior
to machine storage.
10
www.BISSELL.com
Replace Brush Roll by inserting the Brush
Roll end into the right side of the foot. Then
lock the pull tab into place by pressing
downward.