Filling Your Clean Water Tank - Bissell CROSSWAVE PET User Manual

Filling Your Clean Water Tank

1
The Clean Water Tank is
located on the back of
the machine.
Clean Water Tank
Dirty Water Tank
4
For large area cleaning (up to 700 sq ft)
a. Fill tank with warm tap water to the second
water fill line.
b. Then add formula to the second formula
fill line.
5
Screw the cap back onto the tank.
A few notes about fi lling the Clean Water Tank:
• Fill with warm (140°F/60°C MAX) tap water and add the appropriate
BISSELL® solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
6
www.BISSELL.com
2
Lift the Clean Water Tank
straight up to remove from
the machine.
For small area cleaning (<350 sq ft)
a. Fill tank with warm tap water to the first
water fill line.
b. Then add formula to the first formula fill
line.
6
3
Unscrew the cap from the
Clean Water Tank.
The Clean Water Tank has
two measuring volumes
depending on the amount
of space you would like
to clean.
On the back of the machine,
align with the grooves and slide
tank into place until you hear
a click.