Panel And Device Configuration - Interlogix NX-181xx NetworX Installation Manual

Panel and Device Configuration

Step Advanced system configuration – Panel and device configuration
1. [MENU]-[0] Selects main menu - Option 0, Advanced system configuration.
 Enter your code, touch menu to exit.
2. [?]-[?]-[?]-[?] Enter your 4 or 6 digit Programming code.

3. [2] Selects Panel and device configuration.
 Select a device number followed by enter, touch menu to go back.
[ ? ]
4. Select the device you wish to program.
[ENTER]

5. [MENU] Moves back to step 4, select a device number.
Moves back to step 3, Advanced system configuration
6. [MENU]
selection.
7. [MENU] Exits from Advanced system configuration.
When in device programming:
Feature number then [ENTER], to move to the feature you wish to program.
Touch [MENU] to accept changes and move to the next segment.
Touch [ENTER] to exit the feature.
Touch [MENU] three times to exit device programming.
NX-181xx NetworX Voice keypad with touch buttons Installation Manual
Touch one for keypad configuration, touch two for panel and device
configuration, touch three to configure service provider phone number,
touch menu to exit.
Selected device? is connected, select a feature number followed by
enter, touch menu to go back.
13