About Copyright; Revision History - Kenwood TK-5210 Modification Information

About Copyright

All copyrights and other intellectual property rights for this technical document and relevant in-depth manuals as well as
the software described in this technical document, relevant in-depth manuals, and help texts and manuals attached to the
software are owned by Kenwood Corporation.
A right to use the software described in this technical document and relevant in-depth manuals is granted to a licensee by
Kenwood Corporation; however, the title to and ownership of the software shall be owned by Kenwood Corporation. Refer
to the help texts attached to this software for details.
Kenwood Corporation does not warrant quality and performance of the software described in this technical document and
relevant in-depth manuals to conform to the applicability of any use, and Kenwood Corporation shall be free from liability
for any defects, damage or loss, or from any warranty to anything other than expressly described in this technical
document and relevant in-depth manuals.

Revision history

Date
February 16, 2005 1) Correcting the Figure 2-2 Connecting the QE-2, and draw a line between AUDIO INHIBIT and INH.
1) Split the version 1.01 document from page 11 as In-House Information (IHI) document.
2) Added 1.2 26-pin Connector.
3) Added Table 1-1 14-pin Universal Connector Assignment.
4) URLs are removed from page 2 and 5.
June 30, 2005 5) Add the warning box on page 2, 5 and 8.
6) Revised the procedure on 2.1.1 SC20-460 board.
7) Add the description to Configuring and Modifying the TX-RX PCB configuration and modification for 2 different
serial number groups.
8) Description and page layout are revised throughout the document.
July 4, 2005 1) 14-pin Universal Connector and 26-pin Connector tables are revised.
July 22, 2005 1) Description of 2.2.2 Configuring and Modifying the TX-RX PCB is revised.
Description