Kenwood TK-5210 Modification Information page 17

5. Install the Man-down Tilt Switch on the rear surface of
the cushion.
Install the Man-down Tilt Switch on the cushion by
inserting the switch into the chassis.
6. Reinstall the cover and battery pack.
2.3.3 Configuration using KPG-95D
You can write the Man-down Tilt Switch information to the
transceiver using KPG-95D after installing the Man-down
Tilt Switch.
Follow the procedure below.
1. Run KPG-95D.
You must read the data from the transceiver or use
data configured in the transceiver when adding the
Man-down Tilt Switch information to the current
configuration data. Refer to the Field Programming
Reference for instructions on how to read the
configuration data from the transceiver.
2. Click the Edit menu > "Personal" > "Personal
Features" and click the Emergency Options tab.
MOD (K)/Ver. 1.04
Man-down Tilt Switch
Cushion
Sheet
2 CONNECTING THIRD PARTY OPTIONAL DEVICES
The Emergency Options tab appears on the display.
3. Configure the Man-down Tilt Switch information.
Refer to the "FPRG 6.2.3 Emergency Options tab" for
instructions on how to configure the Man-down switch
information.
4. Write configuration data to the transceiver.
Refer to the Field Programming Reference for
instructions on how to write the configuration data to
the transceiver.
Confidential 13
Contents