Ani Board; Items Required For The Installation - Kenwood TK-5210 Modification Information

Hide thumbs Also See for TK-5210:

Table of Contents

4. Write configuration data to the transceiver.

Refer to the Field Programming Reference for

instructions on how to write the configuration data to the

transceiver.

2.2

ANI Board

The ANI Board can be installed in the transceiver.

This section describes how to install the Cimarron

Technologies QE-2 in the transceiver.

•

Transceiver

•

QE-2

•

Cushion Tape (Supplied)

Remove the battery pack to install the ANI board.

2.2.1

Configuring and Modifying the

QE-2 Board

1. Prepare the QE-2 board.

MOD (K)/Ver. 1.04

2 CONNECTING THIRD PARTY OPTIONAL DEVICES

2. Modify and configure the QE-2 board.

•

Heat and remove by suction the solder from K.

•

Solder positions E, V and P.

•

Confirm that E, V, and P are soldered (bridged).

Confidential

Contents

Table of Contents