About The Ts-990S Usb Audio Function - Kenwood TS-990S Setting Manual

1. About the TS-990S USB Audio Function

This guide is a document for the ARUA-10 software which connects the TS-990S and the
PC with a USB cable and makes it possible to use the speaker and microphone of the
PC instead of the speaker and microphone of the transceiver body.
When the TS-990S is connected to the computer using a USB cable, the USB audio
function can be used to play incoming audio over the computer speakers and transmit
audio from the computer microphone.
This guide explains how to set up the TS-990S to use its USB audio function and how to
use the ARUA-10 software to control input/output routes of the USB audio signals from a
computer.
Important

USB audio may be delayed due to unavoidable principles. Consequently, do not
perform operations (such as contests or pile-ups requiring quick responses) for
which delays are likely to be a problem.
 Refer to Chapter 5, "Limitations", for other limitations.

To use the USB audio function, knowledge not only of transceivers but also of
computers is required. JVC KENWOOD does not offer support for purchasing
computers or for customer's computers.

JVC KENWOOD Corporation shall bear no responsibility for related damage such
as damage caused by missed communications and dialog opportunities due to
incorrect customer settings, nonconformances, or misoperations as a result of
using this document or the ARUA-10 software.
2