Table of Contents
Advertisement
Do not lift the cooker by the door handles.
Backguard
Before installing the cooker, assemble the backguard "C"
.
• The backguard "C" can be found packed at the
rear of the cooker.
• Before assembling remove any protective film/
adhesive tape.
• Remove the two spacers "A" and the screw "B"
from the rear of the cooktop.
• Assemble the backguard as shown and fix it by
screwing the central screw "B" and the spacers
"A".
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90LDBGFX3/User_Guide_OR90LDBGFX...
Fig. 8 Incorrectly raising the
cooker
Fig. 9 Assembling the backguard
Updated: Fri, 10 Apr 2020 07:18:41 GMT
Powered by
5
Advertisement
Table of Contents
