Fisher & Paykel OR90LDBGFX3 Installation Instructions Manual page 11

Table of Contents

Fig. 13 Auxiliary, semi-rapid and rapid burner

Adjusting the Minimum Burner Setting

Check whether the flame spreads to all burner ports when the burner is lit with the gas tap set to the minimum position.

If some ports do not light, increase the minimum gas rate setting.

Check whether the burner remains lit even when the gas tap is turned quickly from the maximum to the minimum

position. If the burner does not remain lit, increase the minimum gas rate setting.

To Adjust the Minimum Gas Rate Setting:

• Turn on the burner

• Turn the tap to the MINIMUM position

• Take off the knob

• With a small flat screwdriver turn the screw to the

correct regulation.

https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR90LDBGFX3/User_Guide_OR90LDBGFX...

Fig. 14 Triple ring wok burner

Updated: Fri, 10 Apr 2020 07:18:41 GMT

Table of Contents