Add An Admin User Account - Juniper C Series Quick Start Manual

C Series C3000 and C5000 Controller Quick Start

Add an Admin User Account

12
(Optional) Specify whether or not to allow root login through SSH.
2.
[edit system services ssh]
user@host> set root-login (allow | deny | deny-password)
where:
allow — Allow users to log in to the C Series Controller as
— Disable users from logging in to the system as
deny
deny-password — Allow users to log in to the system as
authentication method (for example, RSA authentication) does not require a
password. (Default)
To configure the system to accept Telnet connections:
In edit mode, type the following command.
[edit]
user@host# set system services telnet
Create an account for an administrative user.
1.
[edit]
user@host # edit system login user user
For example:
[edit]
user@host # edit system login user myadmin
Set the class for the administrative user to the login class that you created.
2.
[edit system login user myadmin]
user@host # set class class
For example:
[edit system login user myadmin]
user@host # set class super-user
Specify the name of the administrative user.
3.
[edit system login user myadmin]
user@host # set full-name "John Doe"
Set the CLI editing level to expert.
4.
[edit system login user myadmin]
user@host# set level expert
(Optional) Specify that a space be used for command completion.
5.
[edit system login user myadmin]
user@host # set complete-on-space on
Verify that the configuration for the administrative user is correct.
6.
[edit system login user myadmin]
user@host# show
root through SSH.
through SSH.
root
root through SSH when the
Copyright © 2013, Juniper Networks, Inc.