Section 4 - Display And Controls - Dukane iQ Series User Manual

Front Panel
On the i220 Servo Ultrasonic Welder, the front panel
contains a Power Indicator which appears as a lighted
iQ
Servo label. This indicator changes colors depending
on the status of the machine. It appears green when the
machine is ready to run a weld cycle, pink when outside
of a standard run view, red when an alarm is triggered or
in E-Stop, blue when needing to be homed, and yellow
when in "offline" mode. Also, it will repeatedly cycle
through all of the colors during the start-up sequence.
Once the start-up sequence is complete the indicator will
turn blue indicating the system is ready to be homed.
With the i220 Servo Ultrasonic Welder, control of the
machine can be accessed through the front Control
Panel or a computer using
The control panel provides a combination of buttons
and a display screen to operate your device (See Figure
4-2). For details on operating the i220 Servo using the
iQ
Explorer II software, see Section 7 - Machine
Operation.
Mode
Dukane Manual Part No. 403-601-00
iQ
Explorer II software.
Soft
Keys
Keys
Figure 4-2 Control Panel, with key features marked
Figure 4-1
Screen Display
Navigation Keys

Section 4 - Display and Controls

Power Indicator
Control Panel
Front Panel
Page 23