Options for the Cisco TelePresence System 3000
Revised: July 28, 2008, OL-16441-01
Auxiliary Control Unit
The auxiliary control unit provides the ability to conserve energy by powering the Cisco TelePresence
System 3000 (CTS-3000) lights, projector, and optional peripherals on and off. There is one power inlet,
five controlled power outlets, and one power outlet that is not controlled (unswitched). In addition, there
are two serial ports, one of which allows you to control the power for the projector, and incoming and
outgoing Ethernet connections that allow you to control an additional peripheral item. The auxiliary
control unit is controlled by your CTS-3000 administrator and can be configured to:
•
Note
•
•
Parts List for Auxiliary Control Unit
Key
Part Description
Audio/Video Expansion Unit, CTS-LIGHT-CTRL, 74-5405-01
1
Auxiliary Control Unit
2
Bracket for auxiliary control unit
3
Cat6 Ethernet Cable, 3M
4
Cat6 Ethernet Cable, 1M
5
Serial Cable, 6M
6
Cable Tie
7
Cable Holder, 1 inch x 1 inch
35
M5 x 10mm pan head screws
OL-16441-01
Turn the CTS-3000 lights on during a Cisco TelePresence call and turn the lights off after the call is
completed.
You can also configure the lights to stay on for a period of time after a call completes.
Turn the CTS-3000 lights on according to a configured time schedule.
Leave the CTS-3000 lights on continuously.
C H A P T E R
Part Number
Qty
74-5405-01
1
700-27073-01
2
37-0887-02
2
37-0901-01
2
37-0980-01
1
51-4641-01
25
51-4712-01
25
48-0426-01
5
3
Notes
Cisco TelePresence System
3-1