Cisco TelePresence Presentation Codec
•
The Ethernet ports in the auxiliary control unit are interchangeable. Use either of the ports for the
Note
connections from the primary codec and the presentation codec.
Configuring a Cisco TelePresence Presentation Codec
To configure the presentation codec, refer to
software release.
Cisco TelePresence System
2-18
Connect the other Ethernet port of the auxiliary control unit to the Presentation Codec Ethernet port
(white/red Ethernet connection on the presentation codec).
Chapter 2
Options for the Cisco TelePresence System 1000
Cisco TelePresence System Administrator's Guide
for your
OL-16441-01