Chapter 5
Upgrading a Cisco TelePresence System 3000 to a Cisco TelePresence System 3200
Step 3
Carefully unscrew the lenses from the camera assembly.
Figure 5-2
Removing Lenses from The Camera Assembly
Step 4
Attach the new lenses to the camera assembly. Tighten until the lenses are seated and finger-tight but do
not overtighten.
Step 5
Re-attach the camera hood and lens hood.
OL-16441-01
Removing and Replacing the Camera Lenses
Cisco TelePresence System
5-7