Testing The Connection To The Zyair - ZyXEL Communications ZYAIR G-1000 Quick Installation Manual

3.2 Testing the Connection to the ZyAIR

1. Click Start, (All) Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ping 192.168.1.2" followed by a space and the IP address of
the ZyAIR (192.168.1.2 is the default).
3. Press ENTER. The following screen displays.
C:\>ping 192.168.1.2
Pinging 192.168.1.2 with 32 bytes of data:
Reply from 192.168.1.2: bytes=32 time=10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Ping statistics for 192.168.1.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum =
C:\>
Your computer can now communicate with the ZyAIR.
ZyAIR G-1000 Access Point
10ms, Average =
6
2ms