Problems With The Wlan Interface; Testing The Connection To The G-560 - ZyXEL Communications G-560 User Manual

Problems with the WLAN Interface

PROBLEM
Cannot access the
G-560 from the
WLAN.
I cannot ping any
computer on the
WLAN.

Testing the Connection to the G-560

1. Click Start, (All) Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ping" followed by a space and the IP address of the G-560
(192.168.1.2 is the default).
3. Press ENTER. The following screen displays.
C:\>ping 192.168.1.2
Pinging 192.168.1.2 with 32 bytes of data:
Reply from 192.168.1.2: bytes=32 time=10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Reply from 192.168.1.2: bytes=32 time<10ms TTL=254
Ping statistics for 192.168.1.2:
Approximate round trip times in milli-seconds:
Your computer can now communicate with the G-560 via the ETHERNET port.
Troubleshooting
Chart A-5 Troubleshooting the WLAN Interface
Make sure the wireless adapter on the wireless station is working properly.
Check that both the G-560 and your wireless station are using the same ESSID,
channel and security settings.
Make sure the wireless adapter on the wireless station(s) is working properly.
Check that both the G-560 and wireless station(s) are using the same ESSID,
channel and security settings.
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Minimum = 0ms, Maximum =
Diagram A-1 Pinging the G-650
CORRECTIVE ACTION
10ms, Average = 2m
ZyXEL G-560 User's Guide
A-3