6 Hardware Installation
This section provides step-by-step instructions on attaching the antennas and mounting your ZyAIR.
6.1 Attaching Antennas
Follow the steps below to connect the supplied antennas.
1. Locate the antenna connectors on the sides of your ZyAIR.
2. Screw the antennas clockwise onto the antenna connectors. The antennas should be perpendicular to the
ground and parallel to each other.
Make sure the antennas are securely screwed onto the antenna connectors.
6.2 Hardware Mounting Installation
In general, the best location for the access point is at the center of your intended wireless coverage area. For
better performance, mount the ZyAIR high up free of obstructions.
6.3 Free-standing
Place your ZyAIR on a flat, level surface (on a desk or shelf) that is strong enough to support the weight of
the ZyAIR with the connection cables.
ZyAIR G-1000 Access Point
Figure 6 Attaching Antennas
19