Testing The Connection To The Zyair - ZyXEL Communications ZyAIR G-3000 Quick Start Manual
802.11g access point/bridge/repeater
Hide thumbs
Also See for ZyAIR G-3000:
- User manual (362 pages) ,
- Quick start manual (21 pages) ,
- Manual (1 page)
Table of Contents
Advertisement
5.
The Internet Protocol TCP/IP Properties
screen opens (the General tab in
Windows XP).
Configure your computer to use a static IP
address, select Use the following IP
address and fill in the IP address
(192.168.1.3 to 192.168.1.254) and
Subnet mask (255.255.255.0) fields.
6.
Leave the Preferred DNS sever and Alternate DNS server fields blank if you do not know the
IP address(es) of the DNS server.
7.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
8.
Click OK to close the Local Area Connection Properties window.
3.2 Testing the Connection to the ZyAIR
1.
Click Start, (All) Programs, Accessories and then Command Prompt.
2.
In the Command Prompt window, type "ping 192.168.1.2" followed by a space and the IP address of
the ZyAIR (192.168.1.2 is the default).
ZyAIR G-3000 Quick Start Guide
9
Advertisement
Table of Contents
