Change Login Password - ZyXEL Communications P-2900-4HB User Manual

Chapter 2 Introducing the Web Configurator
Following table lists the menu screens.
Table 2 Web Configurator Screens Summary
LINK
Status
Advanced Setup
Password
LAN
NAT
Dynamic DNS
Static IP
Remote
Management
Logs
Maintenance
Logout

2.4 Change Login Password

It is highly recommended that you periodically change the password for accessing
the ZyXEL Device. If you didn't change the default one after you logged in or you
24
SUB-LINK FUNCTION
System Status Use this screen to view firmware and system related
information.
CableModem Use this screen to view information about the cable
Status modem, upstream and downstream channels.
MTA Status Use this screen to view information about MTA and
status about the VoIP ports.
Use this screen to change your password.
LAN Setup Use this screen to configure LAN DHCP and TCP/IP
settings.
Static DHCP Use this screen to configure static DHCP settings.
Use this screen to enable or disable Network Address
Translation (NAT). You can also use this screen to
configure rules the ZyXEL Device uses to convert
between private to public IP addresses.
Use this screen to set up dynamic DNS.
Use this screen to configure up to three static WAN IP
addresses and RIP settings. Configure a static IP
address only if your cable service provider gave you
the information. See
configuration example.
Use this screen to configure through which interface(s)
and from which IP address(es) users can use Telnet/
FTP/Web to manage the ZyXEL Device.
Log Settings Use this screen to change your ZyXEL Device's log
settings.
View Log Use this screen to view the logs for the categories that
you selected.
DHCP Table This screen lists the DHCP clients connected to the
ZyXEL Device.
Diagnostic These screen displays information to help you identify
problems with the ZyXEL Device general connection.
Click this to exit the Web Configurator.
Section 4.3 on page 41 for a
P-2900-4HB User's Guide