Configuring Static Ip Addresses - ZyXEL Communications P-2900-4HB User Manual

Log into the ZyXEL Device's Web Configurator. Configure the Advanced Setup >
3
LAN screen as shown next. Click Apply.
Enable DHCP client on computers C1 and C2 by selecting Obtain an IP address
4
automatically in the network settings. Connect them to the ZyXEL Device's LAN
through a switch. Each of them should get an IP address respectively.

4.3.2 Configuring Static IP Addresses

Use this section to configure two static IP addresses for servers A and B.
Computers (C1~C2) also use one static IP address to access the Internet.
P-2900-4HB User's Guide
Chapter 4 Tutorials
43