Chapter 9 Remote Management Configuration
You may only have one remote management session running at a time. The ZyXEL
Device automatically disconnects a remote management session of lower priority
when another remote management session of higher priority starts. The priorities
for the different types of remote management sessions are as follows.
Telnet
1
HTTP
2
Finding Out More
See
Section 9.3 on page 74
management configuration.
9.1.1 What You Can Do in the Remote Management Screen
Use the Remote Management screen
through which interface and from which IP address users can use Telnet, FTP or
HTTP to manage the ZyXEL Device.
9.2 The Remote Management Screen
Click Advanced Setup > Remote Management to open the following screen.
Figure 24 Advanced Setup > Remote Management
72
for technical background information on remote
(Section 9.2 on page
72) to configure
P-2900-4HB User's Guide