ZyXEL Communications ZyXEL NWA3160 User Manual page 143

Table 50 Configuring SSID
LABEL
QoS
Layer-2 Isolation
Intra-BSS Traffic
blocking
MAC Filtering
Apply
Reset
ZyXEL NWA-3160 Series User's Guide
DESCRIPTION
Select the Quality of Service priority for this BSS's traffic.
• In the pre-configured VoIP_SSID profile, the QoS setting is VoIP. This is
not user-configurable. The VoIP setting is available only on the
VoIP_SSID profile, and provides the highest level of QoS.
• If you select WMM from the QoS list, the priority of a data packet depends
on the packet's IEEE 802.1q or DSCP header. See
105 for more information on WMM and WMM priorities. If a packet has no
WMM value assigned to it, it is assigned the default priority.
• If you select ATC from the QoS list, the ZyXEL Device automatically
assigns priority based on packet size. See
more information on ATC.
• If you select ATC+WMM from the QoS list, the ZyXEL Device uses WMM
on the wireless network and ATC on the wired network. See
on page 106 for more information on ATC+WMM.
• If you select WMM_VOICE, WMM_VIDEO, WMM_BEST_EFFORT or
WMM_BACKGROUND, the ZyXEL Device applies that QoS setting to all
of that SSID's traffic.
• If you select NONE, the ZyXEL Device applies no priority to traffic on this
SSID.
Note: When you configure an SSID profile's QoS settings,
the ZyXEL Device applies the same QoS setting to all
of the profile's traffic.
Select a layer 2 isolation profile from the drop-down list box. If you do not
want to use layer 2 isolation on this profile, select Disable. See
on page 145 for more information.
Select Enable from the drop-down list box to prevent wireless clients in this
profile's BSS from communicating with one another.
Select a MAC filter profile from the drop-down list box. If you do not want to
use MAC filtering on this profile, select Disable. See
150 for more information.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Chapter 10 MBSSID and SSID
Section 8.3.1 on page
Section 8.3.2 on page 105
Section 8.3.3
Section 11.1
Section 11.4 on page
for
143