When the ZyXEL Device is in AP controller mode, click SSID Information in the Status
screen. The following screen displays.
Figure 51 SSID Information
The following table describes the labels in this screen.
Table 16 AP Association List
LABEL
SSID
Security Mode
Stations
6.2 Navigation Bar
When the ZyXEL Device is in AP controller mode, the navigation bar on the left of the web
configurator screen is different from standalone mode.
Figure 52 AP Controller: Links
The following table describes the labels in the navigation bar.
Table 17 Navigation Bar Labels
LABEL
STATUS
MGNT MODE
ZyXEL NWA-3160 Series User's Guide
Chapter 6 AP Controller Mode (NWA-3160 Only)
DESCRIPTION
This displays the SSID (Service Set IDentifier) that identifies your wireless
network. Each AP may use a different SSID (or different multiple SSIDs).
This displays the type of security used by the wireless network. A
network's security settings are the same regardless of the AP on which it is
running.
This displays the number of wireless clients using the wireless network.
These links configure
all CAPWAP-managed
access points.
These links configure
only the AP controller.
DESCRIPTION
Click this to go to the Status screen (see
Click this to go to the Management Mode screen (see
79).
Section 4.1 on page
73).
Section 5.2 on page
85