Figure 107 Remote Management: Snmp; Table 66 Remote Management: Snmp - ZyXEL Communications ZyXEL NWA3160 User Manual

Figure 107 Remote Management: SNMP

The following table describes the labels in this screen.

Table 66 Remote Management: SNMP

LABEL
SNMP Configuration
Get Community
Set Community
Trap Destination
SNMP Version
Trap Community
User Profile
(NWA-3165 Only)
ZyXEL NWA-3160 Series User's Guide
DESCRIPTION
Enter the Get Community, which is the password for the incoming Get and
GetNext requests from the management station. The default is public and
allows all requests.
Enter the Set Community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
Select the SNMP version for the ZyXEL Device. The SNMP version on the
ZyXEL Device must match the version on the SNMP manager. Choose SNMP
version 1 (SNMPv1), SNMP version 2 (SNMPv2) or SNMP version 3 (SNMPv3;
NWA-3165 only).
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is "public" and allows all requests.
This field is available only when SNMPv1 or SNMPv2 is selected in the SNMP
Version field.
This field is available only when you select SNMPv3 in the SNMP Version field.
When sending SNMP v3 traps (messages sent independently by the SNMP
agent) the agent must authenticate the SNMP manager. If the SNMP manager
does not provide the correct security details, the agent does not send the traps.
The ZyXEL Device has two SNMP version 3 login accounts, User and Admin.
Each account has different security settings. You can use either account's
security settings for authenticating SNMP traps.
Select User to have the ZyXEL Device use the User account's security settings,
or select Admin to have the ZyXEL Device use the Admin account's security
settings.
Use the Configure SNNMPv3 User Profile link to set up each account's
security settings.
Chapter 14 Remote Management Screens
171