ZyXEL Communications ZyXEL NWA3160 User Manual page 237

2 If this does not work, you have to reset the device to its factory defaults. See
on page
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.1.2.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide and
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
4 Make sure your computer is in the same subnet as the ZyXEL Device. (If you know that
there are routers between your computer and the ZyXEL Device, skip this step.)
• If there is no DHCP server on your network, make sure your computer's IP address is
in the same subnet as the ZyXEL Device.
5 Reset the device to its factory defaults, and try to access the ZyXEL Device with the
default IP address. See your Quick Start Guide.
6 If the problem continues, contact the network administrator or vendor, or try one of the
advanced suggestions.
Advanced Suggestions
• Try to access the ZyXEL Device using another service, such as Telnet. If you can access
the ZyXEL Device, check the remote management settings to find out why the ZyXEL
Device does not respond to HTTP.
• If your computer is connected to the WAN port or is connected wirelessly, use a computer
that is connected to a LAN/ETHERNET port.
I can see the Login screen, but I cannot log in to the ZyXEL Device.
1 Make sure you have entered the user name and password correctly. The default password
is 1234. This fields are case-sensitive, so make sure [Caps Lock] is not on.
2 You cannot log in to the web configurator while someone is using the SMT or Telnet to
access the ZyXEL Device. Log out of the ZyXEL Device in the other session, or ask the
person who is logged in to log out.
3 Disconnect and re-connect the power adaptor or cord to the ZyXEL Device.
4 If this does not work, you have to reset the device to its factory defaults. See
on page
ZyXEL NWA-3160 Series User's Guide
43.
(Section 12.3 on page
I forgot the IP address for the ZyXEL Device.
Section 1.7 on page
Section 20.1 on page
43.
Chapter 20 Troubleshooting
156), use the new IP address.
37.
235.
Section 2.2
Section 2.2
237