Figure 53 Access Point Mode: Mac Filter; Table 21 Access Point Mode: Mac Filter - ZyXEL Communications ZyXEL AG-220 User Manual

Figure 53 Access Point Mode: MAC Filter

The following table describes the labels in this screen.

Table 21 Access Point Mode: MAC Filter

LABEL
Filter Type
Filter MAC
Address 1-16
Save
Cancel
Chapter 5 Access Point Mode Configuration
DESCRIPTION
Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the AG-220, MAC addresses not listed will be
allowed to access the AG-220.
Select Accept to permit access to the AG-220, MAC addresses not listed will be
denied access to the AG-220.
Specify the MAC address(es) of the wireless station(s) that is allowed or denied
association to the AG-220.
Enter six pairs of hexadecimal digits (separated by colons) in the range of "A-F",
"a-f" and "0-9" (for example, 00:A0:C5:00:00:02).
If you enter an invalid MAC address, once you click Save to save the values, a
warning screen will be displayed.
Click Save to save the changes to the AG-220.
Click Cancel to discard the changes.
ZyXEL AG-220 User's Guide
79