Infrastructure; Ad-Hoc; Figure 1 Application: Infrastructure - ZyXEL Communications ZyXEL AG-220 User Manual

ZyXEL AG-220 User's Guide

1.2.1.1 Infrastructure

To connect to a network via an access point (AP), set the AG-220 network type to
Infrastructure. Through the AP, you can access the Internet or the wired network behind the
AP.

Figure 1 Application: Infrastructure

1.2.1.2 Ad-Hoc

To set up a small independent wireless workgroup without an AP, use Ad-Hoc.
Ad-Hoc does not require an AP or a wired network. Two or more wireless clients
communicate directly with each other.
24 Chapter 1 Getting Started