Figure 12 Zyxel Utility: Profile; Figure 13 Zyxel Utility: Add New Profile - ZyXEL Communications ZyXEL AG-220 User Manual

ZyXEL AG-220 User's Guide
This example illustrates how to set up a profile and connect the wireless client to an access
point configured for WPA-PSK security. In this example, the AP's SSID is "SSID_Example3"
and its pre-shared key is "ThisismyWPA-PSKpre-sharedkey". You have chosen the profile
name "PN_Example3".
1 Open the ZyXEL utility and click the Profile tab to open the screen as shown. Click Add
to configure a new profile.

Figure 12 ZyXEL Utility: Profile

2 The Add New Profile screen appears. The wireless client automatically searches for
available wireless networks, which are displayed in the Scan Info box. You can also
configure your profile for a wireless network that is not in the list.

Figure 13 ZyXEL Utility: Add New Profile

3 Give the profile a descriptive name (of up to 32 printable ASCII characters). Select
Infrastructure and either manually enter or select the AP's SSID in the Scan Info table
and click Select.
4 Choose the same encryption method as the AP to which you want to connect (In this
example, WPA-PSK).
32 Chapter 2 Tutorial