Adding A New Profile; Figure 36 Station Mode: Profile: Add A New Profile; Table 12 Station Mode: Profile: Add A New Profile - ZyXEL Communications ZyXEL AG-220 User Manual

ZyXEL AG-220 User's Guide
Table 11 Station Mode: Profile (continued)
LABEL
SSID
Channel
Security
Transfer Rate

4.4.1 Adding a New Profile

Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.

Figure 36 Station Mode: Profile: Add a New Profile

The following table describes the labels in this screen.

Table 12 Station Mode: Profile: Add a New Profile

LABEL
Add New Profile
Profile Name
SSID
Network Type
Next
Exit
62
DESCRIPTION
This field displays the SSID (Service Set IDentifier) of the profile.
This field displays the channel number used by the profile.
This field shows whether data encryption is activated (WEP (WEP or 802.1x),
WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE).
This field displays the transmission speed of the selected profile in megabits per
second (Mbps).
DESCRIPTION
Enter a descriptive name in this field.
Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the AG-220 associate to any AP or roam
between any infrastructure wireless networks.
Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer
computer.
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
Chapter 4 Wireless Station Mode Configuration