ZyXEL AG-220 User's Guide
4.2 The Link Info Screen
When the ZyXEL utility starts, the Link Info screen displays, showing the current
configuration and connection status of your AG-220.
Figure 27 Station Mode: Link Info
The following table describes the labels in this screen.
Table 3 Station Mode: Link Info
LABEL
AP Mode
Station Mode
Wireless Network
Status
Profile Name
Network Name
(SSID)
AP MAC Address
Network Type
Transmission Rate This field displays the current transmission rate of the AG-220 in megabits per
Security
Channel
Statistics
Transmit Rate
Receive Rate
52
DESCRIPTION
Use the check box to set the AG-220 to operate in wireless station or access point
mode. Refer to
Section 1.2.3 on page 25
This is the name of the profile you are currently using.
The SSID identifies the wireless network to which a wireless station is associated.
This field displays the name of the wireless device to which the AG-220 is
associated.
This field displays the MAC address of the AP or peer computer to which the AG-
220 is associated.
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
network.
second (Mbps).
This field displays whether data encryption is activated (WEP (WEP or 802.1x),
TKIP (WPA/WPA-PSK/WPA2/WPA2-PSK), AES (WPA/WPA-PSK/WPA2/WPA2-
PSK)) or inactive (DISABLE).
This field displays the radio channel the AG-220 is currently using.
This field displays the current data transmission rate in kilobits per second (Kbps).
This field displays the current data receiving rate in kilobits per second (Kbps).
for more information.
Chapter 4 Wireless Station Mode Configuration