Table of Contents
Advertisement
Table 44 Configuration: VLAN Configuration: 802.1Q (continued)
LABEL
New
Delete
Modify
Load Template
Port List
Close
12.2.1 Modify an 802.1Q VLAN
Ports are assigned membership in a VLAN by associating a VLAN ID with the ports.
In the VLAN screen, click New or Modify to display the following screen.
Chapter 12 VLAN
DESCRIPTION
Click New to create a new VLAN. You must enter a VLAN ID and a VLAN Name to
create a new VLAN. The new VLAN and name is displayed in the left-hand column in
this screen.
Click on a VLAN in the left-hand column of this screen and then click the Delete
button to remove it from the VLAN template.
Click on a VLAN in the left-hand column of this screen. Change the VLAN ID, VLAN
Name or change the configuration of the egress, forbidden and untagged ports. Click
the Modify button to save the changes.
Use a VLAN template to overwrite existing selected VLANs. Select one or more
VLANs and click the Load Template button. See
information.
Click on a port in the Egress Ports list to add the selected port to the port list. If a
port is not selected from any of the three port lists, then it is a normal tagged port.
Refer to the following table for the VLAN port type descriptions.
Click Close to close the screen.
NetAtlas Enterprise 1.00 User's Guide
Section 4.1 on page 56
for more
118
Advertisement
Table of Contents
