Table of Contents
Advertisement
NetAtlas Enterprise 1.00 User's Guide
Table 16 Status: STP Status (continued)
LABEL
Hello Time
(second)
Max Age (second) This is the maximum time (in seconds) a switch can wait without receiving a
Forwarding Delay
(second)
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last
Change
Polling
Close
5.3 VLAN Status
Follow the steps below to view the VLAN status of a switch.
1 Click Status and then VLAN Status.
2 Choose a switch from the list located on the left-hand side of the screen.
65
DESCRIPTION
This is the time interval (in seconds) at which the root device transmits a
configuration message. The root bridge determines Hello Time, Max Age and
Forwarding Delay
configuration message before attempting to reconfigure.
This is the time (in seconds) the root switch will wait before changing states (that
is, listening to learning to forwarding).
This is the path cost from the root port on this switch to the root switch.
This is the priority and number of the port on the switch through which this switch
must communicate with the root of the spanning tree.
This is the number of times the spanning tree has been reconfigured.
This is the time since the spanning tree was last reconfigured.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking the Apply button.
Click Close to close the screen.
Chapter 5 Status
Advertisement
Table of Contents
