Table of Contents
Advertisement
NetAtlas Enterprise 1.00 User's Guide
2 Click Tool and then Web Access to open the switch web configurator password screen.
From here you can log in directly to the switch.
3 Type the switch User name and Password to access the web configurator.
Figure 63 Web Access
4 Refer to the switch User's Guide for information on the web configurator main screen.
8.2 Ping
Ping the host to see if the links and TCP/IP protocol on both your computer and the switch is
working. Follow the steps below:
1 Select a switch from the list of devices shown in the Device List Panel.
2 Click Tool and then Ping to have the switch ping the IP address of the selected device.
Note: The device IP address varies according to whether the switch connection to the
EMS computer uses an in-band or an out-of-band IP address.
Figure 64 Ping
85
Chapter 8 Tools
Advertisement
Table of Contents
