Finding Your Switch; Device Auto-Discovery; Figure 22 Compile Mibs; Figure 23 Config, Discovery Agents - ZyXEL Communications 1 User Manual

Figure 22 Compile Mibs

6 Repeat Steps 2 to 5 for the following;
Note: You must add and compile the MIBs separately in the order specified.
7 Finally click Done in the Compile Mibs screen.

1.6 Finding your Switch

The SNMPc Network Manager can find new devices automatically using auto-discovery
(enabled by default) or you will have to add device(s) manually.

1.6.1 Device Auto-Discovery

1 To enable auto-discovery and then find your device, click Config, Discovery/Polling.

Figure 23 Config, Discovery Agents

2 Select the Enable Discovery check box and click OK.
Chapter 1 Introducing the EMS
• rfc2925.mib (DISMAN-PING-MIB)
• rfc3291.mib (INET-ADRESS-MIB)
• rfc3621.mib (POWER-ETHERNET-MIB)
• zyxel.mib
• zyxel-es3124.mib
• zyxel-es3124pwr.mib.
NetAtlas Enterprise 1.00 User's Guide
34