Using Snmp; Figure 26 Map Object Properties: Generall; Table 2 Map Object Properties: General - ZyXEL Communications 1 User Manual

Figure 26 Map Object Properties: General

Table 2 Map Object Properties: General

FIELD
Label
Type
Address
Icon
Group
Descr

1.7 Using SNMP

Check that you are using SNMPv2c. If you are not using SNMPv2c, you must uninstall any
previous versions and install SNMPv2c. Refer to RFC 1901 for more information on SNMP
Version 2c (SNMPv2c). Follow this procedure to use SNMPv2c.
1 Right-click the Device icon and select Properties.
2 Click the Access tab.
Chapter 1 Introducing the EMS
l
DESCRIPTION
Type a device name for identification purposes. If you do not configure this field,
the default label is "New Object".
This field shows what type of device it is, for example a hub, workstation, router
etc. This field displays Device for the switch.
Type the IP address of the switch.
You may change the default icon by clicking >> and then choosing a different
icon.
This is the group number associated with this type of device. This field is
optional.
Type a description of your device in this (optional) field.
NetAtlas Enterprise 1.00 User's Guide
36