Advertisement
Remote Alarm
It is possible to connect the unit with external alarm signal using connection
pins J5-1 and J5-2 on the main board
Connecting a relay to 12/14 V DC max –input 400mW and connect it to an
accessory by buzzer or by light in the pin will be
Allarm on in the pin J1-2 power on by 12Vdc
Alarm off in the pin J5 1-2 power off by 0V dc
In the parameter list check the parameter
RCFG= if "0" (the pin J5 on only service alarm is active)
RCFG= if "1" (the pin J5 on only in case end cycle)
RCFG= if "2" (the pin J5 on when there is the service alarm is active and end
cycle)
:
RCFG:
51
Hide quick links:
Advertisement
