Advertisement
Extraordinary maintenance
(30-50-70-100-180KG)
Maintenance frequency
In order to guarantee constant machine e ciency, it is advisable to carry out the checks with the frequency given in
the following table:
MAINTENANCE, INSPECTIONS, CHECKS AND
CLEANING
Routine cleaning
General cleaning of machine and surrounding area
Mechanical protection devices
Check condition, and for any deformation, loosening
or removed parts.
Control
Check mechanical part, for any breakage or
deformation, tightening of screws. Check readability
and condition of words, stickers and symbols and
restore if necessary.
Machine structure
of machine.
Safety signs
Check readability and condition of safety signs.
Electrical control panel
Check electrical components installed inside the
Electrical Control Panel. Check wiring between the
Electrical Panel and machine parts.
Electrical connection cable and plug
Check connection cable (replace it if necessary) and
plug.
Extraordinary machine maintenance
Check all components, electrical equipment,
corrosion, pipes, ......
(*)the machine is designed and built for a duration of about
FREQUENCY
10 years. After this period of time (from machine commis
sioning) the machine must undergo a general inspection and
Daily
overhaul. Some examples of checks to be carried out are
given below:
•
Monthly
•
Yearly
•
•
Yearly
•
•
Yearly
Yearly
Yearly
Every 10
years (*)
h c
e
k c
f
r o
a
y n
x o
i d i
e s
d
e
e l
t c
c i r
l a
if necessary, replace them and restore the initial condi-
tions;
check the structure and welded joints in particular;
check and replace bolts and/or screws, also checking for
any loose components;
check the electrical and electronic system;
check the functionality of safety devices;
check the general condition of protection devices and
guards.
o c
m
p
o
n
e
n
s t
r o
p
r a
; s t
126
Hide quick links:
Advertisement
