Electrolux BLAST CHILLER LW Service Manual page 113

2.0 CW Membrane identifications
Version of the User Interface
I
2.1Configuration CW
•
If the main boards upper shown are
parameters :
• Keep pressed the button
•
Enter the Factory setting and modify the parameter under mentioned:
SET ALL THE OTHER PARAMETERS FOLLOWING THE PARAMETERS
LIST, PRESENT IN WEB PAGE, ACCORDING TO THE PNC OF THE
THE PARAMETERS, THAT ARE NOT PRESENT ON THE PARAMETERS
LIST IN THE WEB PAGE , MUST BE SET, FOLLOWING THE TAB 6.1
----------------------------------------------------------------------------------------------------------------------------
MAILING ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
P a g e
|
without c
while switching ON
OLdU =
ACFG = B
LENG =
UNITS.
AT PAG,
TELEPHONE
+39 0434 380737
without turbocooling CW
present, modify the following
y
n
6/7.
TELEFAX E-MAIL ADDRESS
+39 0434 380740 lorenzo.giusti@electrolux.it
: