How To Use Your Machine - Bowflex Xtreme 2 SE Owner's Manual

Power Rod Resistance
®
Power Rod units are made from a special composite
®
material. Your rods are sheathed with a protective
black rubber coating. Each rod is marked with its
weight rating on the "Rod Cap".
you will have an additional one or two pair of 50
pound Power Rod units, respectively.
®
Hooking the Power Rod
Unit to the Cables
You may use one rod or
several rods in combination,
to create your desired
resistance level.
To hook multiple rods up to
one cable, bend the closest
rod toward the cable and
place the cable hook
through that rod cap.
You can then hook up
the next closest rod
through the same cable
hook.
Hooking up the closest
rod first prevents rods
from crossing over the
top of one another.
How to Use
Your Machine
Adjusting and
Understanding
the Resistance
The standard Bowflex
Xtreme 2 home gym
®
comes with 210 pounds
of resistance (one pair of
5 pound rods, two pair
of 10 pound rods, one
pair of 30 pound rods,
and one pair of 50 pound
rods).
If you upgraded to a 310
or 410 pound capacity
®
Storing the Bowflex
Disconnect the
cables from the
Power Rod
®
unit when your
are not using
your Bowflex
®
Xtreme 2 home
®
gym. Use the rod
binding strap
® included with
your machine to
bind all the rods
together at the
top. You can also
place your cables
and grips through the strap to keep them out of the
way.
To Order Additional Sets Of 50 lb. Power
Rod Units Please Call 1-800-269-3539
®
Safety
When hooking the
Power Rod unit to the
®
cable hooks, do not stand
directly over the tops of
the rods. Stand off to one
side when connecting and
disconnecting the Power
Rod unit from the cables.
®
Xtreme 2 Home Gym
® ®