Page 1
The Bowflex Motivator ® ® Home Gym Assembly Instructions 51516 Rev B (07/2005)
Page 3
For best results, assemble your Bowflex® Motivator® 2 home gym in the location where you intend to use it. For safe operation of the Bowflex® Motivator® 2 home gym, allow a workout area of at least 8’4” x 6’6” (2.6 m x 2.0 m) of free space.
Page 4
210# Rod Pack Leg Extension Tube End Plugs NOTE: LEAvE ALL CABLES WRAPPEd ANd BAGGEd UNTiL YOUR Leg Extension Foam Rollers BOWFLEx® MOTivATOR® 2 HOME GYM iS FULLY ASSEMBLEd. Threaded Knob * Specifications subject to change without notice. Leg Extension Roller Tubes...
Page 5
Hardware Guide (1:1 scale) Item #: A Item #: C Item #: D Item #: E Item #: F Item #: G Qty: Qty: Qty: Qty: Qty: Qty: Descr: Button Head Descr: Button Head Descr: Button Head Descr: Button Head Descr: Button Head Descr:...
Page 6
Assembling Your Bowflex Motivator 2 Home Gym ® ® STEP 1 Parts: • Base Platform • Lower Lat Tower Tool: • Hex Key (7/32”) Lower Lat 1-1 Secure the Lower Lat Tower to the Tower Base Platform. Button Head 1-2 dO NOT COMPLETELY TiGHTEN HARdWARE.
Page 7
Assembling Your Bowflex Motivator 2 Home Gym ® ® Button Head STEP 3 Screw Parts: • Base Assembly (from Step 2) Washer • Chest Bar w/Pulleys & Cables Washer Tools: • Hex Key (7/32”) Nylock • Wrench (9/16”) - or Adjustable Wrench...
Page 8
Assembling Your Bowflex Motivator 2 Home Gym ® ® STEP 5 Parts: • Leg Extension • Leg Extension Cross Tube Leg Extension Tools: • Hex Key (7/32”) • Wrench (9/16”) - or Adjustable Wrench Nylock 5-1 Place the Leg Extension over the Leg Extension Tube.
Page 10
Assembling Your Bowflex Motivator 2 Home Gym ® ® STEP 9 Parts: • Upper Lat Tower Assembly (from Step 8) • Base Assembly (from Step 7) Tool: • Hex Key (7/32”) Upper Lat 9-1 insert the Upper Lat Tower Assembly into the Lower Lat Tower Tower.
Page 11
Assembling Your Bowflex Motivator 2 Home Gym ® ® STEP 11 Parts: • 210# Rod Box • Rod Box Mount Tool: • Phillips Head Screwdriver 11-1 Lay the 210# Rod Box onto one side. Place the Rod Box Mount onto the bottom of the Rod Box.
Page 12
Assembling Your Bowflex Motivator 2 Home Gym ® ® STEP 13 Base Parts: Leg Extension Assembly Tube End Plugs • 4 Leg Extension Foam Rollers Leg Extension • 4 Leg Extension Tube End Plugs 16 1/2”Roller Tubes • 2 Leg Extension Roller Tubes •...
Page 13
Assembling Your Bowflex Motivator 2 Home Gym ® ® Connect the Cables – A Connect cables to Power Rod® unit, chest bar and hand grips: Rod Hooks Power Rods Parts: • 2 Hand Grips w/Ankle Cuffs Chest Bar A-1 Unwrap the Cables from the Chest Bar.
Page 14
Leg Press Belt. Leg Press Belt CONgrATULATIONS! You have successfully completed assembly of your Bowflex® Motivator® 2 home gym! Please inspect your machine to ensure that all fasteners are tight and everything is properly Base Platform assembled. Review all warnings that are affixed to Assembly the machine.