Siemens 1FS6 Series Instructions Manual page 9

A-grade sound intensity level
(EN 60034-9)
or speed range up to 3000 rpm
Thermischer Motorschutz
(EN 60034-11)
Shaft end
(DIN 748-3; IEC 60072-1)
True running, coaxiality,
axial run-out deviation
(DIN 42955; IEC 60072-1)
Vibration severity
(EN 60034-14)
Bearing
Service live of bearing
Winding insulation
(EN 60034-1)
Ambient temperatures
Installation altitude
(EN 60034-1)
Magnetic material
Encoder system
Options/expansions
Type of protection
(EN 60034-5)
Fitted/mounted elements
Encoder systems
True running, coaxiality,
axial run-out deviation
(DIN 42955; IEC 60072-1)
Shaft end
(DIN 748-3; IEC 60072-1)
You will find more technical details, e.g. motor dimensions, in the catalog DA 65.3.
Siemens AG
ENGLISH
< 70 dB(A)
Temperature sensor KTY in the stator
winding and 3 serial connected PTC for
switch off
Cylindrical, without keyway
Tolerance range k6
Tolerance N
Grade N
Rolling contact bearing withou
permanent lubrication
(lifetime lubrication)
fixed bearing on non-drive end
20000 h (guideline)
Temperature class H
-15 °C to +40 °C (5 °F to 104 °F)
Otherwise the rated data are reduced
to 50°C: conversion factor 0,92
to 60°C: conversion factor 0,82
up to 1000 m a.s.l.
2000 m: conversion factor 0,94
2500 m: conversion factor 0,9
Rare-earth material
fitted encoder
- speed recording
- recording the rotor position
- indirect positional recording
IP 65 included radial shaft seal
- planetary gearing
- incremental encoder sin/cos 1 Vpp
- absolute value encoder EnDat
Tolerance R
Cylindrical, with keyway and feather key
Tolerance range k6
(balancing with half feather key))
610.40068.01
9