Siemens 1FS6 Series Instructions Manual page 5

ENGLISH
Qualified Personnel
The device/system may only be set up and operated in conjunction with this manual. Only
qualified personnel should be allowed to install and work on the this equipment. Qualified
persons within the meaning of the safety instructions in this manual are persons who are
authorized to commission, ground, and mark devices, systems and circuits in accordance
with established safety practices and standards.
Intended Usage
Please note the following:
If the device is operated on non-Siemens devices, it may only be used for those non-
Siemens devices and components which have been recommended or authorized by
Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
Disclaimer of Liability
We have checked the contents of this manual. Since deviations cannot be precluded
entirely, we cannot guarantee full agreement. However, the data in the manual are
reviewed regularly and any necessary corrections included in subsequent editions.
Suggestions for improvement are welcomed.
© Copyright Siemens AG 2005. All rights reserved
The reproduction, transmission or use of this document or its contents is not permitted
without express written authority. Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or
design, are reserved.
Siemens AG
Bereich Automation and Drives (A&D)
Geschäftsgebiet Motion Control Systeme (MC)
D-97615 Bad Neustadt an der Saale
5
Siemens AG 610.40068.01