8
Inspection, maintaince, disposal
Clean according to the degree of local contamination in order to ensure that the waste heat
is adequately dissipated.
As the operating conditions very greatly, one can only cite general intervals for fault-free
operations.
Guidelines:
-
Bearing service life 20.000 hours
-
Radial shaft seals approx. 5.000 hours with oil lubrication
Dispose of the motor in accordance with the national and local regulations in the standard
recycling process or return it to the manufacturer. Dispose of the encoder electronics
properly as electronic scrap.
Siemens AG
Dismantling motors is strictly forbidden.
All repair and service work will be done exclusive by the
manufacturer.
ENGLISH
DANGER
610.40068.01
19