6.2.2 To open the electrical component box of the outdoor unit
6.3 Mounting the outdoor unit
6.3.1 To provide the installation structure
RYYQ+RYMQ+RXYQ8~20U7Y1B
VRV IV+ heat pump
4P546228-1A – 2019.10
NOTICE
Do NOT apply excessive force when opening the electronic component box cover.
Excessive force can deform the cover, resulting in entering of water to cause
equipment failure.
8~12 HP
2×
SW8
14~20 HP
NOTICE
When closing the electrical component box cover, make sure that the sealing
material on the lower back side of the cover is NOT caught and bend towards the
inside.
e
a Electrical component box cover
b Front side
c Power supply terminal block
d Sealing material
e Moisture and dirt could enter
X Not allowed
O Allowed
Make sure the unit is installed level on a sufficiently strong base to prevent
vibration and noise.
6×
SW8
a
b
c
d
6
Installation
|
Installer and user reference guide
49