3
|
About the box
3 About the box
3.1 Overview: About the box
Installer and user reference guide
16
This chapter describes what you have to do after the box with the outdoor unit is
delivered on-site.
It contains information about:
▪
Unpacking and handling the outdoor unit
▪
Removing the accessories from the unit
▪
Removing the transportation stay
Keep the following in mind:
▪
At delivery, the unit MUST be checked for damage. Any damage MUST be
reported immediately to the claims agent of the carrier.
▪
Bring the packed unit as close as possible to its final installation position to
prevent damage during transport.
▪
When handling the unit, take into account the following:
Fragile, handle the unit with care.
Keep the unit upright in order to avoid compressor damage.
▪
Prepare the path along which you want to bring the unit inside in advance.
▪
Lift the unit preferably with a crane and 2 belts of at least 8 m long as shown in
the figure below. Always use protectors to prevent belt damage and pay
attention to the position of the unit's centre of gravity.
d
b
a
d
a Packaging material
b Belt sling
c Opening
d Protector
NOTICE
Use a belt sling of ≤20 mm wide that adequately bears the weight of the unit.
▪
A forklift can only be used for transport as long as the unit remains on its pallet
as shown above.
b
d
c
c
RYYQ+RYMQ+RXYQ8~20U7Y1B
VRV IV+ heat pump
4P546228-1A – 2019.10