General Safety Information; Warnings And Cautions - Teledyne PS200-LMP User Manual

PS200-LMP
PORTABLE GAS MONITOR

1.4. General Safety Information

WA R N I N G : A L L I N D I V I D U A LS W H O H AV E O R W I L L H AV E
RESPONSIBILITY FOR USING OR TESTING THIS PRODUCT MUST READ
AND UNDERSTAND THE CONTENTS OF THIS MANUAL. THE PRODUCT
WIL L P ERFORM AS D ESIGNED O NLY IF USED AND TEST ED IN
ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS. FAILURE
TO FOLLOW MANUFACTURER'S INSTRUCTIONS WILL RENDER THE
WARRANTY AND APPROVALS NULL AND VOID. FAILURE TO FOLLOW
THESE INSTRUCTIONS MAY ALSO RESULT IN SERIOUS INJURY OR
DEATH.
The Company can take no responsibility for use of its equipment if it is not used in accordance with
these instructions. If further operational or maintenance details are required but not provided in this
guide, contact the Company or their agent. The Company shall not be liable for any incidental or
consequential damages in connection with any modifications, errors or omissions in this guide.
All pertinent state, regional, and local safety regulations must be observed when using this
product. For reasons of safety and to assure regulatory compliance, repairs should only be
performed by the manufacturer.
Additionally, industry standards, codes, and legislation are subject to change. Updated copies
should be obtained by users to ensure the most recently issued regulations, standards and
guidelines are available.
All pertinent state, regional, and local safety regulations must be observed when handling and
disposing of hazardous material, Toxic (E-Chem) Sensors, batteries and other similar items that
may fall under the classification of hazardous material.
The monitor must be regularly serviced and calibrated by fully trained personnel in a safe area.
Only use Company approved replacement parts.
Instrument must be re-charged in a safe area before use. Refer to
Batteries.
If the monitor detects gas, follow your own organization's procedures and operational guidelines.
Gas can be dangerous and care should always be taken in its presence.
Any right of claim relating to product liability or consequential damage to any third party against
the Company is removed if the above warnings are not observed.

1.5. Warnings and Cautions

WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC
SAFETY.
2
Section 8. Recharging the
64171LMP
Revision 3