Table of Contents
Advertisement
PS200-LMP
PORTABLE GAS MONITOR
2. Introduction
2.1. General Description
Working collaboratively with Con-Edison, National Grid, and the New York City Licensed Master
Plumbers (LMPs), the Company developed the PS200-LMP to provide a fit-for-purpose gas
detector that meets the evolving needs of plumbing technicians. The Company designed this multi-
use detector specifically to address the gas monitoring practices of the plumbing and HVAC
communities and to enhance gas safety.
With three modes of operation, LMPs and their technicians can use this monitor to conduct
regulatory compliant leak surveys of gas piping inside buildings. They can then transfer the results
from leak surveys, via Bluetooth, to applications running on tablets, allowing the survey data to be
visualized and then stored in the cloud for regulatory reporting purposes by a utility.
The monitor also assists with daily duties including purging of interior piping and providing
atmosphere monitoring for both flammable gas and carbon monoxide (CO).
With only two push buttons, the monitor provides the user with a simple to use gas detector
1: PS200-LMP Portable Gas
The monitor features high visibility LED's, a display that changes color from green to red when an
alarm is present, a sounder with a 90dB minimum output and a vibrating alarm. If gas levels
exceed configured limits or a monitor fault exists, there will be a clear and unmistakable
indications.
Bluetooth
Green/Red Visual
Alarms
Left Button
Audible Alarm
Sample Inlet Nozzle
4
Detector).
Figure 1: PS200-LMP Portable Gas Detector
(Figure
Backlit LCD Readout
Green/Red Visual
Alarms
Right Button
Sensors
Charging Contacts
x2
64171LMP
Revision 3
Advertisement
Table of Contents
