Wutim - Set Wrap Up Time - Avaya 2420 User Manual

2420 User Guide

WUTim - Set Wrap Up Time

Sets the extension's busy wrap up time to be inserted between calls.
This function requires the time in seconds to be entered when programmed. The value is shown next to
WUTim. This function cannot be programmed through the phone by the user.
Pressing WUTim sets the extension's busy wrap up time to the indicated number of seconds. This
time is used to set a delay between ending one call and the next call ringing the extension (the waiting
call may be indicated on the display however).
•
[User | Digital Telephony | Advanced | Set | Set Wrap Up Time]
See also:
• NATim - Set No Answer Time.
2420 User Guide
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Page 58